Connection To The Amplifier; Mains Power Connection - Box-Design Record Box USB Instructions For Use

Dear music lover,
thank you for purchasing a PRO-JECT AUDIO phono amplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connectors
Record Box USB
Audiophile phono preamplifier with USB output
Make all connections whilst the phono amplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Do not connect the phono amplifiers output to a phono input (sometimes labelled gram, disc or RIAA)
on the amplifier.
Never use any other power supply than the one supplied with the unit.
Connecting the record player (MM or high output MC cartridges only)
Connect the tonearm signal lead to the INPUT of the phono amplifier. The earthing wire may be connected to
the screw terminal if you encounter hum problems when using the record player.

Connection to the amplifier

Connect the OUTPUT of the phono amplifier to a line input (such as AUX, CD, Tuner, Tape or Video) on
your amplifier.

Mains power connection

Connect the low voltage plug from the power supply to the INPUT AC socket of the phono amplifier before
connecting the power supply to the mains.
2
© Audio Trade GmbH · Pro-Ject Record Box USB · Revision 2013.3.15