Programming The Presets - Hauppauge WinTV USB Installation And Reference Manual

WinTV-USB
Installation and Reference Manual
Tune: Fine tune the current radio channel.
Seek: Search for the next active FM radio channel.
Mem: Sets a FM radio channel preset. To assign the current station to a
preset, click on Mem and then on one of the Preset buttons (1-10).
Mute: Turn off the sound.
Mono: Force mono reception.
Scan: Searches for new stations until you click on Stop. Click the RIGHT
mouse button anywhere on the -radio window to set the Scan mode.
Min:Minimizes the -radio window.
CD: Starts the Audio CD-Player for playing back Audio-CD´s.
TV: Closes the radio application and starts the application.
OFF: Closes the radio application.
1 - 10: Preset 1 - 10

Programming the Presets

To assign a radio station to a special Preset button do the following:
1. Tune in the desired station with the Seek button (or by using Tune).
2. Click on the Mem button. It will change to red.
3. Click on one of the Preset buttons (1-10).
Using the right Mouse button
When you click the RIGHT mouse button in the -radio window, this menu comes
up:
5-2