Hauppauge WINTV-HVR-1200/1700/2200 QI Quick Installation Manual

WinTV Media Center Kit
Quick Installation Guide for Windows
Vista Home Premium & Vista Ultimate
© 2007 Hauppauge Computer Works · QI-MCKIT-PCIE-V4.0-ENG · 2007/10/12
Hauppauge Computer Works, Ltd.
10 Borough High Street
Bank Chambers
London, UK, SE1 9QQ
www.hauppauge.co.uk
Hauppauge Computer Works, Italia
Viale Giovanni da Cermenate 40
I-20141 Milano, Italia
www.hauppauge.it
Hauppauge Computer Works GmbH
Krefelder Str. 669
D-41066 Mönchengladbach, Germany
www.hauppauge.de
Hauppauge Computer Works, Nordic
Holländargatan 22
S-113 59 Stockholm, Sverige
www.hauppauge.se
Hauppauge Digital Asia, Pte. Ltd.
Blk 1093, Lower Delta Road #04-05
Tiong Bahru Industrial Estate
Singapore 169204
www.hauppauge.com.sg
Included with the WinTV MC-Kit
● The WinTV-HVR-1200 MC PCI-Express board, with a hybrid DVB-T/
Analogue TV tuner with software MPEG encoder
or
● The WinTV-HVR-1700 MC PCI-Express board, with a hybrid DVB-T/
Analogue TV tuner with hardware MPEG encoder
or
● The WinTV-HVR-2200 MC PCI-Express board, with dual hybrid
DVB-T/analogue TV tuners and hardware MPEG encoders
● Media Center Remote control transmitter and two AA batteries
● Media Center remote control receiver box for USB
● IR transmitter cable
●
WinTV Installation CD-ROM
●
WinTV for Media Center Quick Installation Guide (this guide)
N ote: The enclosed WinTV Installation CD-ROM also includes
the WinTV applications, these are optional and are not needed
to use the Media Center application.
Tech Support: (+44) 0207 378 0202
Telephone: (+44) 0207 378 1997
Fax: (+44) 0207 357 9171
support@hauppauge.co.uk
Assistenza: (+39) 02 8489 3275
Telephone: (+39) 02 8489 4747
Fax: (+39) 02 8489 4177
italyinfo@hauppauge.com
Tel.-Support: (+49) 02161 694 88 40
Telefon: (+49) 02161 694 88 0
Fax: (+49) 02161 694 88 15
info@hauppauge.de
Tech support: (+46) 851 800 888
Tel: (+46) 851 800 880
Fax: (+46) 851 800 885
support@hauppauge.se
Tech Support: (+65) 276 4412
Telephone: (+65) 276 9163
Fax: (+65) 276 9167
Page 1
Installing for Windows Vista Media Center
Installation overview
1. Install the WinTV board in your PC and connect the cables.
2. Install driver from WinTV Installation CD-ROM.
3. Install the Media Center remote control.
4. Begin setting up Media Center.
1. Install the WinTV board in your Media
Center PC and connect the cables
Turn the power off on your PC.
Locate a free PCI-Express 1x slot
and install the WinTV product.
Plug your TV antenna into the TV
Connector.
Audio and video from an exter-
nal A/V device (satellite TV
receiver, cable TV box, VCR,
camcorder...) can be connected
into the WinTV via the back panel
connectors. If your A/V device
uses S-Video, connect to the S-
Video input on the WinTV. If your
video device uses composite
video instead of S-Video, use the yellow RCA jack. Audio input from
an external A/V device can be connected into the WinTV via the
3.5mm mini-jack audio input.
N ote: Actual Layout of external connectors may vary, depend-
ing on your model.
2. Install the WinTV Media Center driver
Start your computer and wait for Windows Vista to fully boot. Once
done, cancel any 'Found new hardware wizards' you may see.
Insert your WinTV Installation CD-ROM, the installation window will
automatically appear.
N ote: If the autorun does
not start, browse to the
files on the disc, and double
click on the file called 'Setup'.
In the installation window click
on Step 1: Install WinTV Drivers.
A blue screen will open which
will begin installing and updating
the drivers for your product.
TV Aerial (preferably con-
nect to a rooftop aerial)
Composite video input
S-Video input
Audio input
(mini-jack 3.5 mm)
Page 2