Network Settings - Sharp GX40 User Manual

Network Settings

Selecting a Network
Selecting a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
→
"Settings" "Network Settings"
→
Network" "Automatic"
Setting the Network Manually
→
"Settings" "Network Settings"
→
Network" "Manual"
1.
Select the desired network.
130 Settings
(Tab 4)
(M 12-1)
→
"Select
→
"Select
Adding a New Network
→
"Settings" "Network Settings"
→
Network" "Add New Network"
If there are no entries, press
If there is an entry, press
steps.
1.
Select "Add".
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
Editing the Preferred List
→
"Settings" "Network Settings"
→
Network" "Set Preferred"
1.
Select the name of the network you wish to edit.
2.
Select "Insert" to insert over the selected position,
"Add to end" to insert at the end or "Delete" to
delete.
→
"Select
and go to step 2.
and perform the following
→
"Select