Sharp GX40 User Manual page 113

Setting the Display
You can change the settings of the display.
Setting the Wallpaper
For the standby screen, 5 pictures are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
To Set My Pictures
→
"Settings" "Phone Settings"
"Wallpaper"
1.
Select "My Pictures".
2.
Select the desired picture.
3.
After displaying the picture, press
Note
• Some pictures cannot be used because of their
picture and data types.
• If the picture in My Pictures is already set, it is
displayed in step 1. Press [Change] and select the
desired picture.
112 Settings
(M 12-2)
(M 12-2-1)
→ →
"Display"
.
System Graphics (M 12-2-2)
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used.
To Use Preset Animation/Pattern
→
"Settings" "Phone Settings"
"System Graphics"
1.
Select the desired scene to set the picture to.
2.
Select "Preset Animation" when you select "Power
On" or "Power Off" in step 1.
Select "Pattern 1", "Pattern 2" or "Pattern 3" when
you select "Incoming Call" or "Alarm" in step 1.
→ →
"Display"