To Set the Blinking Operation
This setting enables the backlight to be controlled by
the Java™ application. If set to "Off", the backlight
cannot be turned on from the Java™ application.
→
"Java™"
"Settings"
1.
Select "On" or "Off".
Vibration
(M 1-4-4)
When the vibrator is set in the Java™ application, you
can choose whether the operation is enabled or
disabled.
When a SMAF file is specified in the Java™
application, you can operate the vibrator set in the
SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a music data format for mobile phones.
→
"Java™"
"Settings"
1.
Select from "Enable", "Disable" or "Link to
Sound".
When you set "Link to Sound", the sound of SMAF
file in the application is synchronised with the
vibrator.
→
→
"Backlight"
"Blink"
→
"Vibration"
Java™ Reset
(M 1-4-5)
To Reset All Items in Settings Menu
→
"Java™"
"Settings"
1.
Enter your handset code.
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 110.
Java™ Information
The information about the licenses belonging to Java™
is displayed.
→
"Java™ Reset"
(M 1-5)
Java™
75