Area Info - Sharp GX15T User Manual

Setting Languages (M 4-5-3)
You can select your preferred language for the cell
broadcast message display.
A →
"Cell Broadcasts"
"Language"
The current language is displayed.
1.
Press . The language list is displayed.
2.
Select the desired language.
3.
Press [Back].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
A →
"Cell Broadcasts"
Subjects"
1.
Select "Add/Remove".
2.
Select the desired page.
3.
Press [Back].
Tip
• If the desired page is not in the list that appears in
step 2, select "Create Subject" in step 1, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
→ →
"Settings"
→ →
"Settings" "Set Info

Area Info

(M 4-6)
The Area info is the message information that operators
sent to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed on the stand-by screen.
Note
• This function may not be available on all mobile
phone networks. Contact to your network operator
for more information.
Enabling/Disabling Area Info
Press A during stand-by.
1.
2.
Select "Area Info".
3.
Select "On" or "Off".
Note
• If Area Info is set to "On", the stand-by time will
decrease.
Messages 55