Location Of The Spare Tire And Tools; Removing The Jack And Tools - Ford Freestar 2007 Owner's Manual

Roadside Emergencies
Drive cautiously when using a full-size dissimilar spare tire/wheel and
seek service as soon as possible.

Location of the spare tire and tools

Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle
Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to Tire Pressure Monitoring System
(TPMS) in the Tires, Wheels and Loading chapter. Replace the spare
tire with a road tire as soon as possible.
The spare tire and tools for your vehicle are stowed in the following
locations:
Item
Spare tire
Jack
Jack handle
Flat tire tether, wing screw
Jack extension tool (cargo van
model only)

Removing the jack and tools

1. Locate the access panel on the interior trim. Rotate the panel
retaining clip and remove the panel.
2. Remove the jack and lug nut wrench by turning the thumbscrew
counterclockwise to relieve tension against the stowage bracket.
240
2007 Freestar (win)
Owners Guide (post-2002-fmt)
USA (fus)
Location
Under the vehicle, just forward of
the rear bumper.
Behind the access panel located
on the right rear quarter panel
interior trim.
Attached to the jack with a clip.
Inside tire tether kit, next to jack.
Attached to the jack kit.