Ford Mariner Hybrid 2007 Owner's Manual page 90

Driver Controls
Increasing speed while using speed control
There are two ways to set a higher
speed:
• Press and hold the SET ACC
control until you get to the
desired speed, then release the
control. You can also use the SET
ACC control to operate the
Tap-Up function. Press and
release this control to increase
the vehicle set speed in small
amounts by 1 mph (2 km/h).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET ACC control.
Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold the CST control
until you get to the desired
speed, then release the control.
You can also use the CST control
to operate the Tap-Down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by 1
mph (2 km/h).
• Depress the brake pedal until the
desired vehicle speed is reached,
then press the SET ACC control.
90
2007 Mariner Hybrid (mhv)
Owners Guide (post-2002-fmt)
USA (fus)