Doors-Child Safety Locks - Toyota 2014 Land Cruiser Quick Reference Manual

SAFETY AND EMERGENCY FEATURES
Seat belts
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner's Manual.
Seat belts-Shoulder belt anchor
Push up, or squeeze
lock release to lower
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the "ENGINE START STOP" switch to ON and press and hold the "
until indicator blinks three times. Let the vehicle sit for a few minutes to allow
initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the light.
Take up slack
Too high
Keep as low on
hips as possible
System reset initialization
1. Push and hold " SET" button
until the
indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
SET" button
30

Doors-Child safety locks

Rear door
Moving the lever to the lock position will allow the door to be opened only from
the outside
Spare tire & tools
Tool location
Jack
Spare tire
Removing the spare tire
(1) (2)
(1) Remove the cover.
(2) Insert the jack handle extension into the lowering screw.
(3) Lower the spare tire completely to the ground.
Refer to the Owner's Manual for tire changing and jack positioning procedures.
Tool box
(3)
31