Table of Contents
Advertisement
Connect wires: without ISO
connectors
Caution
‡
Ensure that all loose leads are insulated with electrical
tape.
1
Cut off the bigger end of the supplied
standard connector.
2
Check the car's wiring carefully, then
connect them to the standard connector.
8
7
6
5
Connector
Connect to
10
EN
1
Black wire
2
Yellow wire
3
Orange/
white wire
4
Red wire
5
Green and
green/black
wires
6
White and
white/black
wires
7
Gray and
gray/black
wires
1
8
Purple and
purple/
2
black wires
3
4
3
Connect the supplied standard connector
to the unit.
A metal surface of the car
First connect the black
ground (earth) lead, then
connect the yellow and red
power supply leads.
The +12V car battery
which is live at all times.
Illumination switch
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be
sure to connect the black
ground (earth) lead to a
metal surface of the car
ÀUVW
Left speaker (Rear)
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)
Advertisement
Table of Contents
