Chapter 7 Advanced Settings (Part; Use The Lan Setup Options - NETGEAR DGND3300v2 User Manual

Advanced Settings (Part 1)
7.
Con figu re for u n ique s it uat ion s
This chapter describes advanced features of the N300 Wireless Dual Band ADSL2+ Modem
Router DGND3300v2. This chapter includes the following sections:
•

Use the LAN Setup Options

• Use a Dynamic DNS Service
• Configure the WAN Setup Options
• Set Up Quality of Service (QoS)
• Configure Static Routes
• Wireless Repeating (Also Called WDS)
Use the LAN Setup Options
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The N300 wireless modem router is shipped preconfigured to use private IP addresses on
the LAN side and to act as a DHCP server. The N300 wireless modem router's default LAN
IP configuration is:
• LAN IP address. 192.168.0.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private
networks and should be suitable for most applications. If your network has a requirement to
use a different IP addressing scheme, you can make those changes in the LAN Setup
screen.
on page 110
on page 114
on page 115
on page 118
on page 121
on page 123
110
7