Asus Ez Flash 2 Utility - Asus M5A78L-M LX Plus Manual

Updating from a BIOS file
Select Update BIOS from a file, then click Next.
a.
Locate the BIOS file from the Open window, then click Open.
b.
3. Follow the onscreen instructions to complete the updating process.
2.1.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch
EZ Flash 2 in either of these two ways:
Press <Alt> + <F2> during POST.
•
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
•
press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
C:
Note
[Enter] Select or Load [Tab] Switch
[Up/Down/Home/End] Move
2. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
2-2
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
EON 25P/F16
Current ROM
M5A78L-M LX PLUS
0302 (H:01 B:00)
08/14/2011
C:\
failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[V] Drive Info
[B] Backup [ESC] Exit
Chapter 2: BIOS information