Vax V-111 Instruction Manual page 6

Vax V-111 User Guide.qxd
www.vax.co.uk
7. Cleaning the Pre- and
Post-motor filters
NOTE: The pre-motor filter and post-motor filter
should be cleaned at least twice a year or when they
become discoloured. Vax reccomends frequently
cleaning the filters to optimize the performance of
the vacuum cleaner.
NOTE: Do not use any detergents or boiling water to
wash the filters.
Cleaning the pre-motor filter
Remove the dirt container as previously directed.
Remove the filters as shown (Fig.7/1).
Fig.7/1
The pre-motor and foam filter may be rinsed in luke warm
water max (40°C). Allow to air dry for at least 24 hours
before replacing (Fig. 7/2).
Fig.7/2
Return the pre-motor and foam filter to the unit before
replacing the dirt container.
Cleaning the post-motor filters
NOTE: These are located on both sides of the vacuum
cleaner.
Release the post-motor cover catch by pressing in the
catch at the bottom of the cover (Fig.7/3).
6
dirt container & filter / storage
14/6/07 16:15 Page 6
Fig.7/3
The post-motor filter can be removed from the unit then
may be rinsed in luke warm water max (40°C). Allow to
air dry for at least 24 hours before replacing (Fig.7/4).
Fig.7/4
Replace the post-motor filters back in the vacuum
cleaner.
8. Storage
cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet and rewind the power