Advertisement
3
SET your display to the correct input mode
(VGA/HDMI)
→ You should see the player boot up screen.
4
WAIT while player boots up (up to 60
seconds)
→ once you see "Welcome" on screen,
the unit is ready for content update or
menu configuration.
5
PLUG IN a USB keyboard to the unit's
USB port
→ the player will enter the graphical menu system in approx. 30 sec.
6
NAVIGATE the menus using your keyboard arrows
(up), (down), (left), (right) to move the selection, (Space
bar) to select, (Enter) to confirm, and (ESC) to cancel
→ find and set the correct time/date AND time zone.
IMPORTANT: time zone must be set correctly in the menus or via
management software for scheduled playback.
→ (Wireless model only) Using the USB keyboard, select a wireless
network and provide security information to connect to your wireless
access point.
→ (OPTIONAL) Set a Password in the menus to prevent unauthorized
changes. IMPORTANT: setting a password will hide the menus. To re-
enter the menu, press CTRL-ALT-DEL and enter the password. If you
forget the password, see Reset player to factory defaults.
7
SAVE settings and exit the menu, then REMOVE the USB keyboard.
→ The player will reboot with new settings in place. Settings are now
retained even if you remove the power.
→ For advanced player configuration, such as static IP, proxy server,
time server, display option, and security settings, visit:
www.PlanarDigitalSignage.com/ContentSmart
for more information.
Advertisement
