Advertisement
Port connections
Video input connection
The AV in port lets you
attach TV tuners, live
video camera signals,
pre-recorded videos, and
more via the 3.5mm composite video/audio cable. NTSC/PAL mode is selected
automatically. Also refer to your software documentation to enable display.
System setup
1
ATTACH a video cable (either VGA or HDMI) to your display and the
appropriate port on the media player.
→ When using VGA, your display must support XGA (1024x768) resolution
or greater. Connect audio using the included AV cable.
→ When using HDMI, audio and video are sent over a single HDMI cable.
2
ATTACH the AC power adapter to the media player.
→ Immediately, the
020-1194-00A
green Status LED on the main unit lights up.
Advertisement
