Insignia NS-40L240A13 User Manual page 14

Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 2/DVI jack to connect a
cable or satellite box using DVI. If you use another
HDMI jack, you will not hear sound from the TV
speakers.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 2/DVI jack on the side of your TV.
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the side of your
TV and to the AUDIO OUT jacks on the cable or
satellite box.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 19.
10
3.5mm audio cable
Side of TV
www.insigniaproducts.com
NS-40L240A13 Insignia 40" 1080p LCD TV
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
video jacks on the side of your TV and the
component video out jacks on the cable or
satellite box.
Cables are often
color-coded to match
color-coded jacks.
Cable or satellite box
4 Connect an audio cable (not provided) to the
COMPONENT IN L/R audio jacks on the side of
your TV and to the audio out jacks on the cable
or satellite TV box.
Note
When you connect the audio using the
COMPONENT IN L/R audio jacks, the audio output is
analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 19.
, and P
B
Audio cable
Component video cable
Side of TV
R