Table of Contents
Advertisement
09
Bluetooth
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cell phones have different blue-
tooth menus, please refer to your phone
manual.)
3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, CONNECT
appears.
Bluetooth Connection and
Disconnection
When you established a bluetooth connection
between this unit and the cellphone, the blue-
tooth icon
on the display appears in red.
Press
29
PAIR to turn off bluetooth connec-
tion, and
appears in blue.
Press
, PAIR SUCCESS
will appear on
29
the display. When the bluetooth is connected,
the display will show CONNECT. When the
Bluetooth is disconnected, the display will
show PAIRING TIME OUT.
Note:
*
Make sure the phone battery has good power.
If not, the connection quality may be affected.
* To ensure connection succeed
----Please selete menus of cellphone with bluetooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone manually.
For example: pairing fixture
cellphone
42
* Pressing
in the monitor also performs the
5
same function.
* Press
in the monitor to turn off the
7
bluetooth function.
Using the Unit as a Handsfree
Device
When the unit is ringing,
the display will
show CALL FROM and the phone number
**********
.
To accept call: Press
to answer a call,
30
the display will show PICK UP.
To reject call: Press
31
to reject a call,
the display will show REJECT
.
To end call: Press
to end call,
the display will show HANG UP
Note:
* Some of cellphones do not support reject
call during bluetooth mode.
* Pressing
and
in the monitor also
performs the same function.
Last Number Dialing
Press
30
button, last call number will
apear, press
again, and then REDIAL
OK appears on the display during
conversation.
Note:
* Pressing
in the monitor also performs
the same function.
To Dial by Cellphone
1.
When you make a call by cell phone, the
unit will automatically be activated. DIAL
OK will appear on the display.
2. When you receive a call, PICK UP appears
on the display.
connect.
Before You Start
Location of the Controls
Open
.
Closed
16
7
10
1
4
19
3
2
01
13
5
11
17
15
14
20
12
18
8
7
Advertisement
Table of Contents
