Brookstone Slimline Music System User Manual page 32

TroUblesHooTing
issue
iPod /iPhone is docked but
there is a "Device Not Found" or
"No Signal" error on the remote
screen .
"Failed to Sync" error appears on
remote when manually syncing
the remote .
Movie is not displaying on TV .
31
(CONTINUED)
solution
Let the iPod/iPhone charge for a few
minutes and then remove and re-dock
the iPod/iPhone .
Make sure blue LED on the front of the
speaker is flashing and the remote is close
to and pointing directly at the front of the
speaker while sync is in progress .
a clearer channel cannot be found .
Confirm video cable is connected
to the correct jacks on the speaker .
Confirm correct Video Out cable type
is selected under "iPod Settings . "
Confirm correct TV Signal type is selected
under "iPod Settings . "
If the movie was started before the video
cable type was selected in "iPod Settings, "
the movie may need to be restarted .