Setting The Timer - Brookstone iDesign User Manual

2-in-1 micro cd system for ipod and iphone

Hide thumbs Also See for iDesign:

Table of Contents

2 . Use the

3 . Press the c-aDJ button to confirm and the hour will flash . Use the

buttons to select the hour .

4 . Press the c-aDJ button again and the minute will flash . Use the

buttons to select the minute .

5 . Press the c-aDJ button to confirm the time .

Note:

• Press any button on the remote control or on the unit (except the

the clock will appear . The clock will display for ten minutes .

• in other modes, press and hold the c-aDJ button to display the clock

for several seconds .

seTTing The TiMer

in any mode:

1 . Press and hold the TiMer button, " On" will appear on the screen and

"aM 12:00" will flash .

2 . Press the

button to confirm .

3 . The minutes will flash . Press the

press the TiMeR button to confirm .

4 . The " OFF" will appear on the screen and the hour will blink . You can then set

the time at which you'd like the unit to power off .

buttons to select "24 HOUR" or "12 HOUR" .

buttons to select the hour, then press the TiMeR

buttons to select the minutes, then

button) and

Table of Contents

Show Quick Links

Table of Contents