Door Reversal - Zanussi ZD 19/5 DAC Instruction Booklet

Door reversal

Unplug the refrigerator from the wall socket before
performing the following operations:
1. Remove the lower hinge (1), and the support foot
(2).
2. Unscrew the front left support foot and screw it
into the corresponding position on the opposite
side.
3. Unscrew the two screws which hide the fixing
holes of the hinge on the left-hand side.
4. Detach the lower door from the central hinge (H).
5. Remove the centrai hinge and detach the upper
door from the pin (G). Unscrew the pin (G) and
screw it into the corresponding position on the
opposite side.
6. Remove the two plugs, and remount them on the
other side.
7. Re-assemble the upper door, the centrai hinge
and the lower door.
8. Re-assemble the lower hinge (1) and the support
foot (2) on the opposite side.
Attention
After completion of the door reversibility operation,
verify that the door gasket is adherent to the cabinet.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier.
34
3
D715
D419
H
G
1
2