Nokia 5250 User Manual page 84

84 Connectivity
4 If the other device requires pairing before data can be transmitted, a tone sounds,
and you are asked to enter a passcode. The same passcode must be entered in both
devices.
When the connection is established,
Tip: When searching for devices, some devices may show only the unique address
(device address). To find the unique address of your device, enter *#2820#.
Pair devices
Select Menu Settings
>
To pair with compatible devices and view your paired devices, open the
tab.
Before pairing, create your own passcode (1 to 16 digits), and agree with the owner of
the other device to use the same code. Devices that do not have a user interface have a
factory-set passcode. The passcode is used only once.
1 To pair with a device, select
range are displayed.
2 Select the device, and enter the passcode. The same passcode must be entered on
the other device, as well.
3 Some audio accessories connect automatically to your device after pairing.
Otherwise, to connect to an accessory, select
device.
Paired devices are indicated by
To set a device as authorised or unauthorised, select from the following:
Set as authorised — Connections between your device and the authorised device can
be made without your knowledge. You will not be asked for authorisation or acceptance
separately. Use this status only for your own devices, such as your compatible headset
or PC, or devices that belong to someone you trust.
the paired devices view.
Set as unauthorised — Connection requests from this device must be accepted
separately every time.
To cancel a pairing with a device, select
To cancel all pairings, select
Sending data
and Connectivity
Options
>
in the device search.
Options
Options Delete
>
is displayed.
> Bluetooth.
New paired device. Devices that are within
Options
>
indicates authorised devices in
> Delete.
all.
Paired devices
Connect to audio