Basic Operation; Incident Or Reflected Light Measuring; Setting Measuring Mode - Sekonic Flashmate L-308S Operating Manual

1. Incident or reflected light measuring

1) To set for either incident or reflected light operation, slide the Lumisphere w
mounting until it clicks.
Incident light mode
NOTE:

2. Setting measuring mode

1) Press the Mode button e to select a mode.
The mode switching sequence is as follows.
Shutter Speed Priority
mode (ambient light)
[see page 10]
Cord Flash
[see page 14]
Reflected light mode
Always use the Lumisphere mounting for setting.
Hand operation of the Lumisphere may cause damage.
The Lumisphere is an important light receiving unit. Please
handle with care and try not to mark or soil.
Wipe Lumisphere with a dry soft cloth if it becomes dirty.
Never use organic cleaners (like thinner or benzene) to clean
Lumisphere.
EV mode
(ambient light)
[see page 11]
Auto Reset Cordless
Flash mode
[see page 16]

4. Basic Operation

Setting operation
MODE