Lighting The Appliance - Zanussi Electrolux ZCG 7610 Instruction Booklet

Lighting the appliance

The ignition system works by means of an electric spark system. Details
about the plug are given in 'General information'.
For your safety
In the event of the burner flames being accidentally extinguished,
turn off the burner control and do not attempt to re-ignite the burner
for at least 1 min.
Hotplate
To light
1. Push in the control knob and turn it to the large flame symbol
(highest setting), and press the ignition button immediately. When
the burner has lit release the button.
Warning: If the ignition button is not pressed a build up of gas may
cause the flame to spread.
Please note
: If you have any trouble lighting a hotplate burner turn all
the hotplate control knobs off and make sure the hotplate burner parts
have been replaced correctly.
Z C G 7 6 1 0
FRONT LEFT
4