Fixing To The Adjacent Units; Kitchen Plinth Adjustment - Zanussi DTI 6759 E Instruction Booklet

Fixing to the adjacent units

To prevent the dishwasher tilting, it must be
secured to either the worktop or adjacent kitchen
cabinet/wall using the brackets supplied. Insert the
two fixing brackets into the slots provided in the top
front part of the dishwasher as shown in the figure.
Secure the brackets to adjacent units with the 3.5 x 16
screws using the upper or the side holes.
The appliance must be secured to the
underside of the worktop using the brackets
provided.
Failure to do this could cause damage or
injury.

Kitchen plinth adjustment

To allow correct opening of the door it is sometimes
necessary to cut the kitchen plinth. refer to the
cutting table.
According to dimensions (a) and (b) as shown on
the figure, you will find on the following table the
depth (x) of the cut to be made on the plinth.
The dimensions (a) and (b) of the table are those
most frequently used in the kitchen furnitures.
1 7 0 1 6 0 1 5 0 1 4 0 1 3 0 1 2 0 11 0 1 0 0
40 136 131 125 118 110 100 93 85
50
135 131 125 118 110 102 92 85
60
137 132 125 118 110 102 94 85
70
138 134 128 120 110 104 95 85
80 /
139 130 124 115 105 98 88
90 / / 138 129 120 110 100 90
1 0 0 / / /
(*)
dimensions in mm
(minimum)
Dimensions of the cut
on the plinth
Height (a)*
135 125 115 105 95
600 mm
II54
II59
90
75
75
75
a
X
75
II15
78
80
85
X
52
b
PFI56GB