Zanussi Electrolux FXC 1206 User Manual page 9

132990360GB.qxd 21/01/2004
6 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
●
PREWASHING: when this light comes on this
means that the machine is performing the
prewashing phase.
●
WASHING: when this light comes on this means
that the machine is performing the washing
phase.
●
RINSE = when this light comes on this means
that the machine is performing the rinse phase.
●
SPIN = when this light comes on this means
that the machine is performing the spin phase.
●
END = end of programme
The END pilot light flashes in the event of operating
problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph "Something
not working".
7 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD (anti-crease)
The speeds on the dial refer to cotton programmes.
Position 1200 or 1400 corresponds to 900 r.p.m. for
synthetics and wool and 700 r.p.m. for delicates.
Position 500 corresponds to 450 r.p.m. for delicates
and 500 r.p.m. for synthetics and wool.
●
NO SPIN
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programme.
10:51 Pagina 67
option.
: by selecting this option all the
●
RINSE HOLD (anti-crease)
option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When
the programme has finished the phase light END
is on to indicate that the water must be emptied
out. The door cannot be opened.
To do this:
●
turn the programme selector dial to "O"
●
select the drain
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position or
spin speed at 400 rpm.
●
depress START button.
8 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Delicate
• Wool
• Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
Position corresponds to "cold wash".
At the end of the programme the selector dial
must be turned to position O.
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
67
: by selecting this
or spin programme.
the machine will perform the