Rack Mounting - Alto BK 2.0 User Manual

c. Insert Points Connection
In case you are using the main inserts of your mixing console and you have a single jack for SEND and
RETURN, you can use an insert Y cable . Please see following drawing.
1/4" TRS insert

5.3 Rack Mounting

The most secure mounting is on a universal rack shelf available from various rack manufactures or your music
dealer. The BK 2.0 Compressor /Limiter /Gate fits into one standard 19" rack unit of space.
Please allow at least an additional 4" depth for the connectors on the rear panel. Be sure that there is enough air
space around the unit for sufficient ventilation and please do not place the BK 2.0 Compressor /Limiter /Gate on
high temperature devices such as power amplifiers etc. to avoid overheating.
Insert Leads
TIP RING SLEEVE
TIP RING SLEEVE
TIP RING SLEEVE
13
Tip
SLEEVE TIP
Ring
Sleeve
SLEEVE TIP
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip (Send)
Sleeve
Tip (Return)
Sleeve
1
2(Send)
3
1
2(Return)
3
Centre(Send)
Screen
Centre(Return)
Screen