WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
CONTENTS Warnings Customer service and spare parts Installation Cleaning the interior Location Operation Electrical connection Temperature regulation Rear spacers Fresh food refrigeration Door reversal Movable shelves Fitting the door panel Positioning the door shelves Hints Hints for refrigeration Maintenance Periodic cleaning Periods of no operation Interior light Defrosting...
Cleaning the interior Fresh food refrigeration Before using the appliance for the first time, wash To obtain the best performance: the interior and all internal accessories with luke- ¥ do not store warm food or evaporating liquids in warm water and some neutral soap so as to remove the refrigerator;...
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. D040 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
MAINTENANCE Periods of non-operation Unplug the appliance before carrying out any maintenance operation. When the appliance is not in use for long periods, take the following precautions: remove the plug from the wall socket; Periodic cleaning remove all food; Clean the inside with warm water and bicarbonate of soda.
CUSTOMER SERVICE AND SPARE PARTS If the appliance is not functioning properly, check ¥ If your appliance is still not working properly after that: making the above checks, contact the nearest service centre. ¥ the plug is firmly in the wall socket and the mains power switch is on;...
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used.
Door reversal Unplug the appliance before all operations. To reverse the door, proceed as follows: 1. dismantle the lower hinge (3), pin (1) and the screw (2); 2. slide the door out from pin (D),unscrew the pin and reposition on the opposite side; 3.