Maintenance; Periodical Cleaning; Idle Periods; Something Not Working - Zanussi ZC190F Instruction Booklet

MAINTENANCE

Unplug the appliance before carrying out any
maintenance operation.

Periodical cleaning

Wash the interior of the appliance with lukewarm
water and sodium bicarbonate.
Clean cabinet outer surfaces with a silicone-wax
spray.
The condenser and compressor should be cleaned
using a brush or a vacuum cleaner. This latter
operation will maintain the appliance's excellent
standards of performance and save energy.

SOMETHING NOT WORKING

If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is no power failure; the control knob is in the
right position.

Idle periods

During periods when the appliance is not used, you
should take the following precautions:
remove the plug from the wall socket;
remove all food from the appliance;
defrost and clean the interior and all accessories;
leave the door slightly open, thus letting air
circulate and preventing the formation of mould and
unpleasant smells.
Furthermore:
if the appliance seems too noisy check that the sides
are not touching furniture that can transmit or
amplify a noise or a vibration. Also, check that the
piping of the refrigerant system does not vibrate.
If your appliance is still not working properly after
making the above checks, contact your local dealer
or the nearest service center.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number of
your appliance which can be found inside the
appliance at the bottom on the left hand side.
9