Download Print this page

La Crosse Technology 512A-811 Manual page 4

Atomic digital clock with weather forecast

Advertisement

x
MINUTES: The Minutes will flash. Press and release the PLUS button to set the Minutes.
Press the SET button once to continue.
x
12/24-HOUR TIME: 12hr or 24hr will flash. Press and release the PLUS button to select 12-
hour or 24-hour time mode. Press the SET button once to continue.
x
WEATHER FORECAST ICON: The forecast icon will flash. Press and release the PLUS
button to select the forecast Icon that represents your current local weather. Press and
release the SET button to exit.
x
NOTE: If possible, it is best to select the RAINY ICON when it is raining outside. This allows
for the most accurate future forecasts based on barometric pressure changes.
x
DST: dSt on or dSt of will flash. Press and release the PLUS button to turn the DST feature
ON or OFF. Pres and release the SET button to continue.
SET TIME ZONE:
x
TIME ZONE: Press and release ZONE button to select four U.S. Time Zones:
(ES Eastern, CS Central, MS Mountain, PS Pacific)
NOTE: This station will only support these 4 Time Zones.
WEATHER FORECAST ICONS:
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric
pressure. The weather forecast is based on atmospheric pressure change and is about 70-75%
correct. As weather conditions cannot be 100% correctly forecasted, we cannot be responsible
for any loss caused by an incorrect forecast.
SET ALARM:
x
ALARM HOUR: Press and hold AL button to enter alarm time setting mode. The Alarm Hour
will flash. Use the PLUS or MINUS button to set the Hour. Please note AM or PM. Press and
release the AL button.
x
ALARM MINUTE: The Alarm Minutes will flash. Use the PLUS or MINUS button to set the
Minutes. Press and release the AL button.
ALARM ACTIVATION:
x
Press and release the AL button to show Alarm Time.
x
When in Alarm Mode press and release the PLUS or MINUS button to activate or deactivate
the Alarm.
x
The alarm icon
appears when alarm is activated.
x
To stop alarm for one day, press AL button, when the alarm sounds. The alarm icon
show solid.
SNOOZE:
x
Press the Zz/CH button when the alarm sounds, to trigger the snooze alarm for 5
The snooze icon Zz will flash.
x
To stop alarm for one day, press AL button, while in snooze mode. The alarm icon
show and the snooze icon Zz will disappear.
FAHRENHEIT/CELSIUS:
Transmitter: Remove the battery cover then press and release the C/F button on the transmitter
to select Fahrenheit or Celsius.
Atomic clock: Hold the -/CF button for 3-5 seconds to switch from Fahrenheit to Celsius.
x
Channels: If more than one transmitter is used, set each transmitter to a different channel.
To view: press the CH button to select Ch1, Ch2, Ch3 and auto-channel: scrolling all
channels.
x
Auto-channel will show a circling arrow
through each channel approximately every 8-10 seconds
7
above the channel number and will rotate
8
will
minutes.
will

Advertisement

loading

This manual is also suitable for:

512b-811