Electro-Voice ELX112P Owner's Manual page 8

Tripod and Floor Monitor Operation (cont')
Tripod
Electro-Voice ELX112P and ELX115P loudspeakers include 35mm (1-3/8") stand mounts to allow
mounting on tripod stands or above an ELX118P. Make sure to:
• Check the specifications of the speaker stand to be certain it is capable of supporting the weight of
the speaker.
• Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the legs of
the stand. Do not try to make the stand "taller" and compromise its structural integrity.
• Route cables and position the stand so that performers, production crew and audience members will
not trip over the stand or cables and pull the speaker system over. Secure cables with wire ties or
tape whenever possible.
• Do not attempt to suspend more than one speaker on a stand designed for a single speaker.
• Unless you are confident that you can safely handle lifting the weight of the speaker onto the stand,
ask another person to help you place it.
Figure 2a:
ELX112P / ELX115P on Tripod Stand
8
Figure 2b:
Live X Full-Range/Sub Stack with Pole Mount
Electro-Voice Live X Series Powered Owner's Manual