Electrical Connection; Electrical Requirements - Zanussi Electrolux ZX97/5 Instruction Booklet

Electrical Connection

Any electrical work required to install this
appliance must be carried out by a quali-
fied electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability
should these safety measures not be
observed.

Electrical Requirements

Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate.
The appliance is supplied with a 13 amp plug fitted. In
the event of having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved (BS 1362) fuse must
be used.
Should the plug need to be replaced for any reason,
the wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
Brown
The wire coloured green and yellow must be connec-
ted to the terminal marked with the letter 'E' or by the
earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the ter-
minal marked 'N' or coloured black.
The wire coloured brown must be connected to the ter-
minal marked 'L' or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure
over the outer sheath.
Important
If the mains supply cable is damaged, it must be repla-
ced by a cable available from your local Service Force
Centre.
14
- Earth
- Neutral
- Live