Table of Contents
Advertisement
14-539.fm Page 14 Wednesday, June 30, 1999 1:50 PM
CASSETTE PLAYER OPERATION
PLAYING A CASSETTE TAPE
Warning: To protect your hearing, set
VOLUME to its lowest setting before
you begin playing a cassette tape.
1. Set
FUNCTION/POWER
TAPE. The POWER indicator
turns off.
2. Press STOP/EJECT to open the
cassette compartment door.
3. Load the cassette in the com-
partment with the open edge
facing up and the full reel on the
right.
4. Close the cassette compartment
door.
5. Press PLAY. The POWER indi-
cator lights. The cassette plays
until it reaches the end of the
side, then it automatically stops.
14
Notes:
• To
temporarily
press PAUSE. Press PAUSE
again to resume play.
to
• To rapidly wind the tape for-
ward
or
FAST-F or REWIND. The
cassette deck automatically
stops at the end of the tape.
• To manually stop play, press
STOP/EJECT. The POWER
indicator
STOP/EJECT again to open
the cassette compartment.
6. Adjust VOLUME to a comfort-
able level.
7. Press E-BASS to ON for an
enhanced bass effect. Press it to
OFF for normal bass sound.
RECORDING
You can record from the CD player or
radio, or use the built-in microphone
to make a live recording.
Caution: Be sure the erase-protec-
tion tabs are in place on the cassette
tape you are using to record. If you
try to record on a cassette tape that
has had the erase protection tabs re-
moved, you cannot press RECORD.
Do not force it, as this can damage
the mechanism. See "Preventing Ac-
cidental Erasure."
stop
play,
backward,
press
turns
off.
Press
Advertisement
Table of Contents
