Cisco DPQ2425 User Manual page 43

Field Name
Static IP
Address
Static IP Mask Manual entry is required. Your ISP will provide the information
Default
Gateway
Primary DNS
(static IP only)
Secondary
DNS
(static IP only)
MTU Size
Function Keys
The following function keys appear on the Setup Basic Settings - Network
Configuration page.
Key
Renew WAN IP
Address Lease
Apply
4028630 Rev A
How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Description
Manual entry is required. Your ISP will provide the information
for you to enter into this field.
Note: When setting a static IP address, you must enter the IP
address, subnet mask, and default gateway before the static IP
address will become operational.
for you to enter into this field.
Manual entry is required. Your ISP will provide the information
for you to enter into this field.
Manual entry is required. Your ISP will provide the information
for you to enter into this field.
Manual entry is required. Your ISP will provide the information
for you to enter into this field.
Sets the size of the maximum transmission unit (MTU) for the
network interface. The default value is 0 (zero)
Important: Do not change this value unless you are an
experienced user.
Description
Forces a release and renewal of your WAN IP address
Saves the values you enter into the fields without closing the
screen
43