Wi-Fi Protected Setup (Wps) - Manhattan 525459 User Manual

"aa-bb-cc-dd-ee-ff" or "aa:bb:cc:dd:ee:ff," just enter "aabbccddeeff" (without the
quote marks).
Comment — This is optional and can be left blank, but it's recommended that you
enter something (such as "My Desktop," as shown) that will help you identify an
address later.
Add — Click to add the MAC address and associated comment to the MAC Address
Filtering table.
Clear — Click to remove whatever you entered in the "MAC Address" or "Comment"
fields.

2.7.5 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the simplest way to build a connection between
wireless network clients and this router. You don't need to select an encryption
mode and input a long encryption passphrase every time you need to set up a
wireless client: You only need to press a button on a wireless device/client and
this wireless router, and the WPS will do the rest for you.
This router supports two types of WPS: Push-Button Configuration (PBC) and PIN
code. To use PBC, you need to push a specific button on the wireless client to start
the WPS mode and switch this router to WPS mode. You can push the Reset/WPS
button of this router, or click "Start PBC" in the Web configuration interface to do
this. To use PIN code, you need to know the PIN code of the wireless client and
switch it to WPS mode, then provide the PIN code of the wireless client you want
38
SYSTEM & NETWORK SETUP