M&S Systems PSW112 Owner's Manual page 3

M&S Systems
Unpacking Your Subwoofer
After carefully unpacking your subwoofer, the carton and the
packaging material should be saved for possible use later.
To attach the feet to the subwoofer, lay it on its top with the
speaker facing up. Remove the feet from their package and
screw them into the pre-drilled holes located on the bottom of the
subwoofer with a screwdriver. Once the feet are tightly secured,
place the subwoofer upright on its feet.
If the subwoofer appears to be damaged, do not attempt to
repair or connect the unit to the amplifier. If you have to return
the subwoofer first remove the feet, then repack the subwoofer
and notify your distributor or M&S Systems for replacement or
repair.
You can contact the M&S Customer Service team at 1-800-421-
1587.
PSW112 Subwoofer
Each box contains one subwoofer
available in black only. This is a
freestanding down-firing subwoofer with
adjustable crossover.
Subwoofer Specifications
Frequency Response
Power Rating
Crossover
Height
Width
Depth
Weight
Page 3
30Hz/140Hz
100 Watts RMS
40Hz/140Hz
(adjustable)
15 ¾"
14"
16"
33.5 lbs