Table of Contents
Advertisement
• To change the rhythm, use the
group) buttons to select the rhythm group and then
(w, q) buttons to select a rhythm
use the
ct
number.
• To change the tone, use the
group) buttons to select the tone group and then use
(w, q) buttons to select a tone number.
the
ct
4.
To exit a Music Preset, while holding down
cs
the
(FUNCTION) button, press
PRESET) button.
Creating an Original User
Preset
A Music Preset editor is provided to allow you to
create your own original Music Presets (user presets).
Up to 50 user presets can be stored in Music Preset
Group 4.
1.
Select the Music Preset you want to edit in
order to create your user preset.
2.
Change the tone number, rhythm number,
and other settings of the Music Preset as you
want.
• The settings you configure here will be saved as a
user Music Preset. See step 2 under "Selecting a
Music Preset" (page E-28) for the settings you can
configure and save for a user Music Preset.
3.
cs
Press the
(FUNCTION) and
EDITOR) buttons at the same time.
This displays a screen for selecting the type of editing
operation you want to perform.
Editing operation type
5
through
bm
(rhythm
cm
through
cr
(tone
ck
(MUSIC
ck
(RHYTHM
4.
Edit the Music Preset parameters.
4-1. To edit the chord progression
ct
Press the
(w) button to display "CHORD"
and then press the
advance to the chord progression editing
screen.
Next, perform the editing operation described
under "To edit the chord progression" (page
E-30). After you finish the editing operation,
press the
dm
(EXIT) button to return to the
screen for selecting the type of editing
operation, above.
4-2. To edit Auto Accompaniment parameters
Press the
ct
(q) button to display
"Parameter" and then press the
button to advance to the Auto
Accompaniment parameter editing screen.
Next, perform the editing operation described
under "To edit Auto Accompaniment
parameters" (page E-32). After you finish the
editing operation, press the
to return to the screen for selecting the type of
editing operation, above.
5.
After editing everything you want, press the
dm
(EXIT) button.
• This will display a message asking if you want to
save the user preset.
6.
ct
Press the
(YES) button.
This displays a screen for selecting the Music Preset
number and name for storing the edited data.
• If you do not want to save the edited data, press the
ct
(NO) button in place of the
Music Preset name
Music Preset number for data storage
Music Presets
dp
(ENTER) button to
dp
(ENTER)
dm
(EXIT) button
ct
(YES) button.
E-29
- Quick Links:
- Using MIDI
Hide quick links:
Advertisement
Table of Contents
