WARNINGS It is most important that this instruction book Care should be taken when cleaning the bottom should be retained with the appliance for future door seal and hinge area as any exposed metal reference. Should the appliance be sold or trans- edges may cut if care is not taken.
INSTALLATION Remove all packaging before positioning the The water pressure must be within the limits given in machine. the technical specifications, as it will not function correctly if pressure is outside these specifications. Positioning The water supply hose is fitted with a safety device, If possible, position the machine next to a water tap which prevents water from entering the machine and a drain.
Control panel The controls 1. ON/OFF button In this fully integrated appliance the controls are locat- ed on top of the door. When selecting a programme, Press this button to preset the dishwasher to accept the door needs to be partially opened. settings (selection of wash programmes, drying Audible signals have been introduced to help indicate options, delayed start, etc.).
Page 6
4. Programme selector button 8. Delayed start button To select the required programme, press this button Allows the start of the programme to be delayed by a until the number corresponding to the chosen pro- minimum of 1 hour, up to 9 hours. gramme appears in the digital display (see wash pro- How to set the delayed start gramme guide).
The water softener Important Water contains varying amounts of lime and mineral Salt MUST be used regularly from level 1 upward. salts depending on the area in which you live: these If your water is «level 0» it is already soft and therefore are deposited on the dishes leaving white marks.
Rinse aid The use of this liquid ensures thorough rinsing, spot - MIN = 15 ml and streak free drying, making the water run quickly - MAX = 30 ml off the dishes for sparkling results. It is automatically added during the hot rinse. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16-40 dishwashing programmes, depending upon the dosage setting.
Loading your machine Place teaspoons and other small cutlery on special cut- lery racks on both sides of the cutlery basket. Before placing dishes in the machine, remove any scraps of food from the plates (small bones, toothpicks, fish bones, scraps of meat and vegetables, fruit skins etc.) to avoid clogging the filters and consequently reducing performance.
Adjusting the height of the upper basket Use of the upper basket The upper basket is designed for plates (dessert If washing very large plates (over 27 cm and up to 31 plates, saucers, dinner plates up to 24 cm in diame- cm in diameter) you can load them in the lower ter), salad bowls, cups and glasses;...
HELPFUL HINTS For best washing results: Items not suitable for dishwashers Before loading, remove all scraps of food and soak The following should not be washed in the dishwasher: very heavily soiled pots and pans. Cutlery or dishes with wooden or horn handles or Always arrange saucepans, cups and glasses etc.
Operating Sequence 7. Starting the wash programme 1. Check that the filters are clean Open the water tap. (see cleaning instructions) Close the dishwasher door. An audible signal lasting about 1 second informs you 2. Depress the ON/OFF button that the programme has started. If a delayed start has been selected, the dishwasher The «Programme Selector»...
MAINTENANCE AND CLEANING Cleaning the central filter Internal and external cleaning (After each wash) You must ensure that the seals around the door, the Scraps of food can sometimes accumulate in the cen- detergent and rinse aid dispensers are cleaned tral filter (A) and should be periodically removed by regularly with a damp cloth.
SERVICING Certain problems are due to lack of simple mainte- For washing or drying problems, please carry out nance or oversights and can be solved easily without the checks listed below: having to call out an engineer. Therefore before call- ing the Service, consult the check list here below.
Page 16
If, after the above checks the fault persists, call your local Service Centre. Please make sure you give the model and serial number of the appliance. This infor- mation can be found on the rating plate located on the right-hand side of the dishwasher door (see picture). Prod.No.
BUILDING-IN Building-in features Fitting under a counter (kitchen worktop or sink) This dishwasher is designed to be fitted under a kitchen counter or sink. It is absolutely essential that the dishwasher is In either case, it is essential that the recess dimensions disconnected from the electricity supply before gaining indicated in the picture are followed.
Page 18
Once the correct position has Attention! been found, open the door The weight of the panel should be within the limits and fasten the decor panel given in the "dimensions of the panel", otherwise on the lower section by balancing the door will not be possible. means of two long 4 x 40 Levelling screws provided, using the...
Need help?
Do you have a question about the ZKS 5619 IE and is the answer not in the manual?
Questions and answers