Attaching And Removing The Back Wheels; Using The Parking Brake; Locking The Front Wheels - CONCORD NEO User Manual

_ ATTACHING AND REMOVING THE BACK WHEELS

To attach the back wheel, press and hold the pushbutton as you push
the wheel onto the CONCORD NEO axle, and let it click audibly into
place.
To remove a back wheel, press and hold the pushbutton (19) and pull the
wheel off the axle.
30

_ USING THE PARKING BRAKE

Push the operating lever (13) on the right of the
handlebar (11) down to activate the parking brake
(10) of the CONCORD NEO.
Press the release button and move the operating
lever (13) on the right of the handle bar (11) upward
to release the parking brake.

_ LOCKING THE FRONT WHEELS

To locate the front wheels of the
CONCORD NEO, align the front
wheels towards the back and slide
the locking button (09) from the
inside outwards.
To release the wheels, slide the
locking button from the outside
inwards.
31