Adjusting The Choke Cable - Yamaha 2008 SuperJet Owner's Manual

Maintenance and care
nents. Have a Yamaha dealer lubricate the
handlebar pivot shaft.
Jet thrust nozzle pivot bolts (collars)
G
Intermediate housing
G
Fill the intermediate housing with water-re-
sistant grease through the grease nipple
using a grease gun.
65
Grease quantity:
Initial 10 hours or 1 month:
20.0–22.0 cm³ (0.68–0.74 US oz)
(0.71–0.78 Imp.oz)
Every 100 hours or 12 months:
3.0–5.0 cm³ (0.10–0.17 US oz)
(0.11–0.18 Imp.oz)
EJU34440

Adjusting the choke cable

Check that the choke cable is properly adjust-
ed.
(1) Pull the choke knob out until it stops, and
then release the knob. The knob should
not move.
(2) If the choke knob moves back on its own,
tighten the choke knob adjusting nut
slightly. If the knob is difficult to move,
loosen the adjusting nut slightly.
1 Choke knob adjusting nut