Yamaha ROADLINER XV19SW Owner's Manual page 71

2. Disconnect the headlight coupler,
and then unhook the headlight
bulb holder.
1. Headlight coupler
2. Headlight bulb holder
3. Remove the defective bulb.
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
Take care not to damage the follow-
ing parts:
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
EWA10790
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
ECA10650
1. Do not touch the glass part of the bulb.
5. Connect the coupler, and then in-
To replace the low beam headlight bulb
1. Disconnect the headlight coupler,
6-29
stall the headlight bulb holder cov-
er by turning it clockwise.
and then remove the defective
bulb by turning it counterclock-
wise.
6