Yamaha RST90L Owner's Manual page 32

To remove the passenger seat and backrest
1. Pull the carrier lock lever 1 away from the carrier
lock bracket, and then push it down to unlock the
backrest 2 and the rear carrier 3.
2. Slide both the backrest and the rear carrier forward
until they stop, and then remove them.
3. Remove the passenger seat lock knob 4, and then
remove the passenger seat 5.
4. Align the holes 6 in the rear carrier with the bolts 7
on the carrier lock bracket, and then place the rear
carrier on the carrier lock bracket.
5. Slide the rear carrier backward until it stops.
6. Pull the carrier lock lever 8 up to lock the rear carrier
in place. Then, place the lever under the rear carrier
and secure it with the holder.
CAUTION :
@
When using the rear storage area, do not load any
cargo that is too large for it. In addition, cargo must
not project from the edges of the rear storage area.
@
5-14