Yamaha RS90L Owner's Manual page 58

7. Remove the oil filter cartridge 9 with an oil filter
wrench.
NOTE:
@
An oil filter wrench is available at a Yamaha dealer.
@
8. Apply a thin coat of engine oil to the O-ring of the new
oil filter cartridge.
9. Install the new oil filter cartridge with an oil filter
wrench, and then tighten it to the specified torque.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lb)
10. Install the engine oil drain bolts, and then tighten
them to the specified torques.
Tightening torques:
Crankcase engine oil drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lb)
Oil tank engine oil drain bolt:
16 Nm (1.6 m·kgf, 11 ft·lb)
11. Add 2.0 L (1.8 Imp qt, 2.1 US qt) of the recom-
mended engine oil to the oil tank, and then install and
tighten the oil level gauge/dipstick and the cylinder
head cap.
Recommended engine oil:
See page 6-2.
Oil quantity:
With oil filter cartridge replacement:
3.0 L (2.6 Imp qt, 3.2 US qt)
Without oil filter cartridge replacement:
2.8 L (2.5 Imp qt, 3.0 US qt)
Total amount:
3.7 L (3.3 Imp qt, 3.9 US qt)
12. Start the engine, warm it up for several minutes, and
then turn it off.
8-10