Air Filter; Fittings And Fasteners; Tool Kit And Recommended Equipment - Yamaha PZ50W Owner's Manual

ESU05260

Air filter

Always check that there is no snow under the air filter
element.
1. Remove the front cover and the air filter case cover.
(See pages 8-5–8-8 for removal procedures.)
2. Unhook the air filter element frame fasteners.
3. Lift up the air filter element frame and check the air
filter element. If there is any snow on the air filter ele-
ment, remove the element and brush off the snow,
and then install the air filter element.
4. Place the air filter element frame in its original posi-
tion, and then hook the fasteners onto the frame.
5. Install the air filter case cover and the front cover.
NOTE:
@
After riding the snowmobile, make sure that there is no
snow under the air filter element.
@
ESU00110

Fittings and fasteners

Check the tightness of the fittings and fasteners.
Tighten in proper sequence and torque if necessary.
ESU00345

Tool kit and recommended equipment

It is good practice to carry the tool kit, spare parts, and
other necessary equipment with you while riding the
snowmobile so that minor repairs can be done if neces-
sary. The following should be carried at all times:
G
Tool kit
G Flashlight
G Roll of plastic tape
G Steel wire
G Towrope
G Jumper cables
G V-belt
G
Light bulbs
G
Spark plugs
When you start out for a long distance trip, extra fuel and
oil should be carried as well.
6-10