EBU90007
Fuse replacement
The main fuse and the fuse box are located
under the hood. (See pages 8-6–8-7 for hood
opening and closing procedures.)
If a fuse is blown, turn off the main switch and
install a new fuse of the specified amperage.
If a fuse is blown, replace it as follows.
1. Remove the battery case cover by lifting
it up and pulling it out.
1. Battery case cover
2. Turn the key to "OFF" and turn off the
electrical circuit in question.
CAUTION:
_
To prevent accidental short-circuiting,
turn off the main switch when checking or
replacing a fuse.
_
3. Remove the blown fuse, and then install
a new fuse of the specified amperage.
1. Main fuse
3. Headlight fuse
5. Auxiliary DC jack fuse
7. Signaling system fuse
8. Terminal fuse (for optional speedometer)
9. Carburetor heater fuse
8-43
2. Spare main fuse
4. Ignition fuse
6. Four-wheel-drive fuse
10. Spare fuse (× 3)