Quick Shift Trim System (Q.s.t.s.) - Yamaha GP760Y WaveRunner GP Owner's/Operator's Manual

q
w
GP7-026
N
EJU00360
QUICK SHIFT TRIM SYSTEM
(Q.S.T.S.)
The trim angle of your water vehicle can
be adjusted by operating the Q.S.T.S.
Operating the trim shifting grip of the
Q.S.T.S. changes the angle of the jet (out-
put) nozzle at the rear of the craft. The
nozzle angle changes the trim angle of the
GP7-025
vehicle to one of five positions : two posi-
tions
"N", and two positions
up.
Trim shifting grip
Shift lock release lever
To change the trim angle of the vehicle
1) Set the throttle lever to half open
(3000 r/min) or less.
2) Squeeze and hold the shift lock
release lever. Then turn the trim shift-
ing grip to the desired position.
Turning the grip to A or B from
"N":
Bow will go down while the vehicle
is on plane.
Turning the grip to C or D from
"N":
Bow will go up while the vehicle is
on plane.
3) Release the shift lock release lever to
GP7-027
lock the position.
EJY76010
Do not turn the grip while operating the
vehicle at full throttle, otherwise damage
could occur to the Q.S.T.S.
The Neutral ("N") shift position will pro-
vide good performance for most condi-
tions. To enhance particular types of per-
formance, choose the one of the "Bow
Down" or "Bow Up" positions.
2-10
and for bow down, neutral
and
E
for bow