Yamaha RAPTOR YFM80RW Owner's Manual page 89

Table of Contents

Advertisement

NOTE:
The final gear oil should be between the minimum
and maximum level marks.
3. If the oil is at or below the minimum level mark,
add sufficient oil of the recommended type to
raise it to the correct level.
2
3
1. Dipstick
2. Maximum level mark
3. Minimum level mark
4. Insert the dipstick into the oil filler hole, and
then tighten the oil filler cap.
To change the final gear oil
1. Place the ATV on a level surface.
2. Place an oil pan under the final gear case to
3. Remove the final gear oil filler cap and the fi-
1
1. Final gear oil drain bolt
4. Install the drain bolt, and then tighten it to the
5. Add the specified amount of the recommend-
8-13
collect the used oil.
nal gear oil drain bolt to drain the oil from the
final gear case.
1
specified torque.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
1
2
3
4
5
6
7
8
9
10
11

Advertisement

Table of Contents
loading

Table of Contents