Crossing A Slope - Yamaha RAPTOR YFM80RW Owner's Manual

Whenever possible, ride your ATV straight down-
hill. Avoid sharp angles which could allow the ATV
1
to tip or roll over. Carefully choose your path and
ride no faster than you will be able to react to ob-
2
stacles which may appear.
EWB01130
3
POTENTIAL HAZARD
4
Going down a hill improperly.
WHAT CAN HAPPEN
5
Could cause loss of control or cause the ATV
to overturn.
6
HOW TO AVOID THE HAZARD
Always follow proper procedures for going
7
down hills as described in this Owner's Man-
ual.
8
Note: a special technique is required when
9 braking as you go down a hill.
Always check the terrain carefully before you
10
start down any hill.
Shift your weight backward.
11
Never go down a hill at high speed.
Avoid going down a hill at an angle that
would cause the ATV to lean sharply to one
side. Go straight down the hill where possi-
ble.
WARNING
OK

CROSSING A SLOPE

Traversing a sloping surface on your ATV requires
you to properly position your weight to maintain
proper balance. Be sure that you have learned the
basic riding skills on flat ground before attempting
to cross a sloping surface. Avoid slopes with slip-
pery surfaces or rough terrain that may upset your
balance.
As you travel across a slope, lean your body in the
uphill direction. It may be necessary to correct the
steering when riding on loose surfaces by pointing
the front wheels slightly uphill. When riding on
7-22