Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.23 L (0.2 Imp qt, 0.24 US qt)
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
7. Install the oil filler bolt.
8. Check for oil leakage. If oil leakage is
found, check for the cause.
9. Install the final gear case cover bolts, and
then tighten them to the specified torque.
Tightening torque:
Final gear case cover bolt:
16 Nm (1.6 m·kgf, 11 ft·lbf)
EBU07061
Differential gear oil
Differential gear oil measurement
1. Place the machine on a level surface.
2. Remove the differential gear oil filler bolt
and check the oil level. It should be up to
the brim of the filler hole. If the level is
low, add sufficient oil of the recommend-
ed type to raise it to the specified level.
1. Differential gear oil
2. Differential gear oil filler bolt
3. Specified level
8-19