EBU08801
Final gear oil
The final gear case must be checked for oil
leakage before each ride. If any leakage is
found, have a Yamaha dealer check and re-
pair the ATV.
Replacing the final gear oil
1. Place the ATV on a level surface.
2. Place a container under the final gear
case to collect the used oil.
3. Remove the oil filler bolt and the drain
bolt to drain the oil.
1. Final gear oil filler bolt
1. Final gear oil drain bolt
4. Install the drain bolt and tighten it to the
specified torque.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
5. Fill the final gear case with the specified
amount of the recommended oil.
8-21